Concrete Volume Calculator for Victoria — 2025 Local Market Rates
Construction costs in Victoria vary from the national average based on local labour availability, material transport costs, and the specific urban or regional location. The Melbourne metropolitan area typically has the most competitive pricing due to supplier density and competition.
VIC Paving Costs
Paving in Victoria: $100–$185/m² installed (brick paving, metro Melbourne). Prices vary by suburb and accessibility — Melbourne inner suburbs often command premium rates due to parking restrictions and traffic management requirements during works.
VIC Concrete Pricing
Ready-mix concrete in Victoria: $210–$270/m³ ready-mix (Melbourne metro). Regional VIC areas typically pay 10–25% more than Melbourne metro rates due to transport distance. Mini-mix trucks are less available in regional areas — bagged concrete may be the only option for small jobs.
VIC Decking Costs
Deck construction in Victoria: $350–$500/m² installed (merbau most popular). Merbau remains the most popular hardwood choice in this state.
Building Permits in Victoria
Building permit requirements vary by project type in Victoria. Contact your local VIC council before starting any significant construction project to determine permit requirements, setback rules, and any heritage or overlay restrictions that may apply to your property.
Frequently Asked Questions
What concrete grade should I use for a driveway?
For a standard residential car driveway in Australia: 25 MPa at 100mm depth with SL72 steel mesh reinforcement is the standard specification. For driveways that will take heavy vehicles (trucks, caravans, concrete mixers): upgrade to 32 MPa at 150mm depth. The extra cost is worthwhile for the improved performance and lifespan.
How much does 1 cubic metre of concrete cover?
At 100mm depth: 10 m² of area. At 75mm depth: 13.3 m². At 150mm depth: 6.7 m². Always order 10% extra to allow for subgrade variations, spillage and formwork edge waste. A 10% over-order is far less costly than running short mid-pour.
What is the minimum ready-mix truck delivery in Australia?
Most Australian ready-mix suppliers have a minimum order of 3–6m³ per truck. For smaller quantities (0.5–3m³), mini-mix trucks are available at a premium rate (typically $300–$500 more than standard truck pricing). For very small pours under 0.5m³, bagged concrete may be more practical.
How long after pouring can I drive on concrete?
For a standard 25 MPa residential driveway slab: light foot traffic after 24–48 hours. Vehicles after 7 days (when approximately 70% of design strength is achieved). Full design strength at 28 days — avoid heavy vehicles and point loads before this. In cold weather or if the slab was slow to gain strength, extend these timeframes.